pixel

Up-to-date

New products

Cold Forming Products

Sylac 50-EP

Copper corrosive oil for very difficult re-forming and metal working operations. Suitable for deep drawing of stainless steel.

 

Sylac 120-CP

Inactive oil for very difficult re-forming and metal working operations. Suitable for deep drawing of stainless steel.

 

Sylac RON 06

Chlorine free, high preforming product used particularly for punching of aluminium. Product dries at room temperature.

 

back to top ^

 


 

Heat Treatment Products

Olmakal Rapid 20-S

High-performance quench oil with excellent cooling properties. Additive treatment provides high cooling effect and prevents oil ageing. Applicable primarily as quenching fluid when hardened materials require very rapid cooling properties.

 

back to top ^

 


 

Mould Oils

Olmistran 10

A mould oil for all kinds of moulds used in production of concrete blocks.

 

Olmistran 200 BA

A mould oil for all kinds of moulds used in production of concrete blocks.

  

back to top ^

 


 

Greases

Olmaplex EP R2

Red colored multi-purpose EP  lubricating grease for use in different industries. It has excellent oxidation stability and water resistance. For rolling and plain bearings from  -20 °C to +160 °C (for limited periods up to +220 °C).

back to top ^

 


 

Automotive Lubricants (Agricultural Oils)

  

Olmaline STOU SAE15W-40

OLMALINE STOU SAE 15W-40 je is high quality,multi-purpose universal oil. It is recommended for use in tractors,agricultural and construction machines where engine, gears, rearbridges, wet brakes and hydraulics are lubricated with the same oil.

 

Transhydro TO-4

TRANSHYDRO TO-4 is multipurpose transmision and hydraulic oil which isused power shift transmissions, mostfinal drives and wet brake comparments which require use of oil according to Caterpillar TO-4 specification.

  

back to top ^

 


 

Gear Oils

Olmaredol EP

Modern antiwear industrial  gear oils with excellent EP properties meeting the requirements of DIN 51517 Part 3, CLPSpecifications. These mineral based lubricants have excellent oxidationstability, good water separation ability and also contain rust inhibitor systems.

 


 

Metalworking Fluids-Water Miscible

Primol 3000, Primol 3750

Water mixable, easy-care  cooling lubricant. Biostable for grinding and all cutting/chip removal work. For steel, cast iron, coloured and  light metal. 3-10% conc.entration recommended.

 

Primol 3522

Water mixable biostable concentrate for  ERW tube production.  5-10% concentration recommended.

 

Quakercool 2710 BF

Fully synthetic biodegradable chemical coolant, particularly convenient for grinding of steel, casting-iron and aluminium. 3-8% concentration recommended.

 

Quakercool 2772 LF

Fully synthetic biostable concentrate for cutting/chip removal operations.  For steel, cast iron and aluminium. 4-10% concentration recommended.

  

Biol Tube 011

Water mixable concentrate for  ERW tube production. 3-10% concentration recommended.

 

back to top ^

 


 

"OLMALINE" Engine Oils 

Olmaline Supreme SAE 5W-30

High performance fully synthetic engine oil. For all passenger car petrol and diesel EURO-4 engines with or without turbocharger. Designed to meet the demanding requirements for extended service life.

 

Olmaline Supreme SAE 5W-40

High performance fully synthetic engine oil. For all passenger car petrol and diesel EURO-4 engines with or without turbocharger. Designed to meet the demanding requirements for extended service life.

 

Olmaline UHPD SAE 10W-40

Ultra high performance diesel (UHPD) engine oil for use in EURO-4, EURO-5 and EURO-6 diesel engines with or without turbo charger. Specially engineered to meet the long drain requirements.

 

Olmaline SF/CF series

High performance multigrade motor oil for all  petrol and disel engines with or without turbo charger. Prevents black sludge. Catalyst safe.

 

back to top ^

 


 

Transformer Oil

Nytro 4000X

An inhibited super grade, Nytro 4000X conforms to IEC 60296 Edition 4.0 – including the fulfilment of specific requirements for special applications. Developed and formulated to deliver maximum resistance to oil degradation, Nytro 4000X provides outstanding oxidation stability for a longer transformer life with less maintenance.

 

Nytro Lyra X

An inhibited high-grade oil, Nytro Lyra X conforms to IEC 60296 Edition 4.0 – including the fulfilment of specific requirements for special applications. Developed and formulated to deliver strong resistance to oil degradation, Nytro Lyra X provides excellent oxidation stability for a longer transformer life with less maintenance.

 

back to top ^

 


 

pixel
pixel

Links

 

Company contact information

 

Newsletter subscription

 

Olma d.o.o.

Poljska pot 2

1000 Ljubljana

Slovenija

 

t: +386 1 58 73 600

f: +386 1 54 63 200

f: +386 1 58 73 666

e: komerciala{at}olma.si

 

Sign up for our newsletter and be among the first informed.

 

 
pixelpixelpixelpixelpixel
pixel
Copyright © 2011 Olma d.o.o. | All rights reserved.