pixel

Cold Forming Products

Emulsible Products for Cold Forming

Primas G

Emulsible paste  for very difficult re-forming and metal working  operations. It can be used as a concentrate or diluted  (1:5 to 1:10).

 

Sylac Al 46, Sylac Al 68

Inactive oils for deep drawing and punching of aluminium. Water wash-out is possible.

 

back to top ^

 


 

Non-emulsible Products for Cold Forming

Sylac 02-G

Copper corrosive chlorine-free oil for drawing of steel tubes and rods, deep drawing and coil rolling.

 

Sylac 70

Inactive oil for very difficult re-forming and metal working operations. Suitable for deep drawing of stainless steel.

 

Sylac 50-EP

Copper corrosive oil for very difficult re-forming and metal working operations. Suitable for deep drawing of stainless steel.

 

Sylac 100-EP

Copper corrosive oil for very difficult re-forming and metal working operations. Suitable for deep drawing of stainless steel.

 

Sylac 120-CP

Inactive oil for very difficult re-forming and metal working operations. Suitable for deep drawing of stainless steel.

 

Sylac 80-05

Copper corrosive oil for very difficult re-forming and metal working operations. Suitable for deep drawing of stainless steel.

 

Quakerdraw 001

Chlorine free, high preforming product used for punching, drawing and stamping of aluminium fins used for manufacturing of heat exchangers. Product dries at room temperature.

 

Sylac RON 06

Chlorine free, high preforming product used particularly for punching of aluminium. Product dries at room temperature.

 

Štancol 25

Chlorine free oil for punching of ferrous, coloured and light metal.

pixel
pixel

Links

 

Company contact information

 

Newsletter subscription

 

Olma d.o.o.

Poljska pot 2

1000 Ljubljana

Slovenija

 

t: +386 1 58 73 600

f: +386 1 54 63 200

f: +386 1 58 73 666

e: komerciala{at}olma.si

 

Sign up for our newsletter and be among the first informed.

 

 
pixelpixelpixelpixelpixel
pixel
Copyright © 2011 Olma d.o.o. | All rights reserved.